Or duck into the Zoom room--this sort of thing is much easier if the people helping can see your screen in real time. There's a big blue button on t...
Yep, read too quickly. Now I see the dilemma...
Amazon link says "must use DC5V power supply." Doesn't look like there's a 5V regulator on the board. The Falcon does, so you wouldn't have the same...
Not to take anything from Jon and the amazing things he and the rest of the crew have done, but some of the posts Phil and Wayne J. have put up recent...
I won't speak for Phil, but Renard is French for fox, and came along at a time when we were all using Vixen (which is one way to say female fox...), s...
One of the manufacturers, I think Falcon, specifically warns not to use tinned wire on the high current connectors because according to them it preven...
My money is on the empty subnet mask. Line 7 of the interfaces file corresponds to the subnet mask and the log you posted indicates an "option with e...
I had this problem too. I downloaded the latest V3 dev build and used it to export my sequences, which solved the problem for me. All the normal war...
You might double check jumper J1 if you are using straight RS-232. Pete
Simple is good. I don't have a lot of insight into where the performance load is with the current design, and I'm looking forward to knowing if it's ...
You are exactly right about the plug-in. At the time I was working on the hardware there were still very few people writing plug-ins and they were wo...
I never did run down the source of the intermittent communications errors at higher channel counts and baud rates. I didn't have a full '595 setup, s...
I like the 4-port idea as a complement to several mid-size (in my case 32 channel) controllers. I use the mid-size controllers exactly as Phil desc...
