I think at this point, there is already the RenC and the DMX-Grinch - so - its kinda of a non-issue, as both can use a USB-Serial interface to operate with.
the reason i was interested in it was as a usb-ledtricks addition not so much a grinch interface.
plus its something else to play with.
so if theres any more info around please feel free to pst me
Peter
fkostyun wrote:I think at this point, there is already the RenC and the DMX-Grinch - so - its kinda of a non-issue, as both can use a USB-Serial interface to operate with.
Actually I think the Idea would be to build it onto a updated grinch board. No separate intermediate board. 🙂
I never did run down the source of the intermittent communications errors at higher channel counts and baud rates. I didn't have a full '595 setup, so it was hard to test. The commercial USB adapters worked for most people, and with the Ren-C out now there just isn't much need.
I think either a '2550 or a '4550 would make a great front end to a Ledtriks, but with so many people working on similar designs, I've been working on other projects instead.
Just about everything I have is on the website, but I'm happy to collaborate if someone wants to push the dessign in another direction.
Pete
well, as i have said i hope to give it a shot soon,
the thing i couldnt work out is why you used the renard plugin. it adds alot of extra code i would have thought.
i guess the idea of not having to make a new plugin was to great.
anyway the idea of adding it to a ledtricks is where i would like to take it. but i dont have a ledtricks yet so im testing with the grinch.
Peter


