I am running Vixen 3.4. I am having a difficult time posting the pic of the setup. Basically, my question boils down to this, is 300 per channel the ...
I am using Vixen 3.4Sent from my iPhone using Tapatalk
Flashed with 3.0 and still no luck. Perhaps I have something configured wrong? Sent from my iPhone using Tapatalk
Thank you for clarifying. I was using a cheaply made power supply. I switched it over to my high grade power switch and I still have no luck.
12V 2A with 3 pixelsSent from my iPhone using Tapatalk
I am using 3.1-dev FW. I am using 12V WS2811 and using them on the correct side (input). One of the pixel sticks just stopped working so I am using ...
Wow, I feel kinda stupid. Supper easy fix. I am now running into another issue. Everything is programmed, using Vixen as the sequencer, the ESPixel...
TazChaLet wrote:if you have team viewer I could connect and see if I could help by looking at your settings Thank you for your help! Your wealth of ...
Could it have todo with something on the board? Perhaps J22 (Balanced Outputs)?
davis80 wrote:You can do one of two things.....either update Vixen or your controller and Vixen. In Vixen, you need to change start channel to be 1 f...
I am only using it as a test. Installed I plan on using appropriately sized wire.
In the E682 Manual, it states that a jumper wire is only needed in the + side from J19 to J18 to power both sides of the board.
Spyder wrote:What is that white wire in J19 :ohmy: Sent from my iPhone using Tapatalk
