ESPixelStick Port i...
 
Notifications
Clear all

ESPixelStick Port issue

15 Posts
5 Users
0 Reactions
3,781 Views
Posts: 16
Topic starter
(@paulmc49255)
Eminent Member
Joined: 12 years ago
[#48944]

Hello All!
I am having issues with the ESPixelStick. I just received 3 of them in the mail and have followed the flashing instructions from Forkineye. My issue is that my machine is not seeing a port to flash to. I have tried, and failed, on a PC and Mac. I cannot seem to find a solution anywhere online and wanted to see if anyone else has had this issue.
Thanks!
Paul


14 Replies
sporadic
Posts: 1199
(@sporadic)
Noble Member
Joined: 14 years ago

Which USB to TTL adapter are you using? Could be a missing driver on Windows or permissions issue on Mac.

Sent from my Moto G (5) Plus using Tapatalk


Reply
Posts: 16
Topic starter
(@paulmc49255)
Eminent Member
Joined: 12 years ago

Wow, I feel kinda stupid. Supper easy fix. I am now running into another issue.
Everything is programmed, using Vixen as the sequencer, the ESPixelStick is receiving Data Packets, Using Terminals (-),(+), and (D) with WS2811 pixels. There is no effect with the pixels with the sequencer nor the Testing feature on the Webpage. I have tried several different strands of pixels and yet nothing. Any advice?


Reply
sporadic
Posts: 1199
(@sporadic)
Noble Member
Joined: 14 years ago
paulmc49255 wrote:Wow, I feel kinda stupid. Supper easy fix. I am now running into another issue.
Everything is programmed, using Vixen as the sequencer, the ESPixelStick is receiving Data Packets, Using Terminals (-),(+), and (D) with WS2811 pixels. There is no effect with the pixels with the sequencer nor the Testing feature on the Webpage. I have tried several different strands of pixels and yet nothing. Any advice?

What version of the firmware are you using? Are they 12v or 5v? Also, make sure you're feeding data in on the correct side of the lights.

Sent from my Moto G (5) Plus using Tapatalk


Reply
Posts: 16
Topic starter
(@paulmc49255)
Eminent Member
Joined: 12 years ago

I am using 3.1-dev FW. I am using 12V WS2811 and using them on the correct side (input). One of the pixel sticks just stopped working so I am using a different one with the same problem.


Reply
Page 1 / 3
Share: