I have been wanting to learn xlights and use both for my show. Just never seem to find the time. I had a complete setup done last year, but did some...
There is another thread on this located . I have seen this myself, but I have been lucky. I have my GECE's powered from the 6804 controller and when...
At the time I felt the masked matrix option was best for what I wanted to accomplish. After going through it on 4 50X50 masked matrices, I can tell y...
I have 2 strings of GECE that I have been using for 3 years. They have been working fine so far (knock on wood). I do have them under the eaves so th...
Thanks for the replies. All of my controllers are 4 output and all distribution is done with them except for one injection output for a large wreath ...
wjp27870 wrote: I find it really baffling that a device designed to be connected to an Ethernet network wouldn't have an option to set a gateway addr...
I have a pixlite4 and it does not have a gateway setting. Due to the way I have my show network setup, I cannot access the admin of the pixlite cont...
Thanks
Dont mean to hijack the thread, but I have windows wired in various different configurations. Would I have to use the polyline or custom model or wou...
I had this issue crop up last year. Changing the timing helped but never fully resolved the issue. You somewhat see it in the preview, but it was ...
ezellner wrote:I was a little skeptical, too, but I was pleasantly surprised. I received the pliers today. I was surprised at the difference it made...
I did not assemble them. They are flat.
I ordered a set of pixel pliers. I will give anything a try, but I dont have much confidence it will be any easier. Did use various backing items, s...
Wow, that is a lot. I cant imagine doing that many in that thick ABS.
