I just did 9 medium plus (140 nodes) and as I put my pixels in, I did so at an angle, then straightened it out. Some required a slight twist. But, yes, it's not easy, and not sure I ever want to do it again.
Wow, that is a lot. I cant imagine doing that many in that thick ABS.
I use a 1/2" PVC Street elbow as a backer. The fitting goes in front of the coro or strip and you push/twist the pixel from the back. Supporting from the front keeps the material (coro/strip) from bending and absorbing the pressure. Any rigid backer that's easy to manipulate should help.
Ya, tell me, lol. I also used an insulated winter work glove for padding, still got a thumb blister. Only built one a night though. I'm working on a design for new tree's next year, using the strips which are much easier. Put 800 in, one evening, easy as could be.
I ordered a set of pixel pliers. I will give anything a try, but I dont have much confidence it will be any easier. Did use various backing items, socket, PVC fitting. Still sucks. The strips are much easier.
