Window Grouping
 
Notifications
Clear all

Window Grouping

7 Posts
4 Users
0 Reactions
2,442 Views
Posts: 28
Topic starter
(@lightingguru)
Trusted Member
Joined: 9 years ago
[#46876]

How can I split the window frames into four separate segments so that I can group all of the sides or top and bottoms together on all of my windows.

Thanks!


6 Replies
Posts: 423
(@keithsw1111)
Reputable Member
Joined: 11 years ago

That's what submodels are for.


Reply
Posts: 28
Topic starter
(@lightingguru)
Trusted Member
Joined: 9 years ago

For some reason some of my window frames have the nodes going to the wrong way. I have them wired to start in the bottom right and go counterclockwise. Is there a way to change the direction of the nodes without making a custom model?

Window Frame

Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago
lightingGURU wrote:For some reason some of my window frames have the nodes going to the wrong way. I have them wired to start in the bottom right and go counterclockwise. Is there a way to change the direction of the nodes without making a custom model?

Never wire anything until you've modeled it in the program. No you currently cannot change the direction with the window model you must wire it clockwise. You will need to re-wire it or switch to the PolyLine or Custom model.


Reply
Posts: 179
(@mildog)
Estimable Member
Joined: 12 years ago

Dont mean to hijack the thread, but I have windows wired in various different configurations. Would I have to use the polyline or custom model or would it be best to rewire? I have been trying to figure out xlights since I started a couple of years ago. I will bet this is one of my sources of frustration.


Reply
Page 1 / 2
Share: