ghormann
@ghormann
Trusted Member
Joined: Dec 29, 2011
Topics: 4 / Replies: 57
Topic
Forum
Replies: 0
Views: 1062
Reply
RE: Quick connect for power supplies

Never seen Powerpoles before and need to look into them. I've previously used these 10 gauge connectors. I've gotten them for $4.50 before. Jus...

11 years ago
Reply
RE: Anyone notice when computerchristmas.com disappeared.

By total chance, I noticed it was back today..... 🙂

11 years ago
Forum
Reply
RE: Reliable Pixel Strips

jnealand wrote:I gave up on pixel strips for anything. I made my arches out of landscape edging and nodes. Very easy to make and setup. This is the...

11 years ago
Reply
RE: Length of wire between controller and start of pixels?

Phrog30 wrote:Yes, 680 pixels means 680 pixels. However, you can't exceed the current rating on the output. If it were me, I wouldn't run power throug...

11 years ago
Reply
RE: DIY LED Express Information : Strobes, Pixels, Pre-Sale!

I haven't tried to repair mine yet, but I'd say almost 1/2 of the ones I purchased have failed now. The one that was most interesting failed into a ...

11 years ago
Reply
RE: First year with any controllers

Very nice. Especially for your first year...

11 years ago
Forum
Reply
RE: Christmas @ The Hormanns

Unlike most who do computer controlled displays, we don't currently use audio. 🙂

11 years ago
Forum
Topic
Forum
Replies: 3
Views: 1889
Reply
RE: Refresh rates in your Matrix

Last year, my Matrix include one string with 680 pixels (plenty of power Injection) and the other had 260. Both were connected to the same PixLite 4 ...

11 years ago
Reply
RE: Anyone notice when computerchristmas.com disappeared.

Back in the day that was a great site. I remember sharing the second "how to" on the site for a simple way to contact SSRs to a parallel port () and r...

11 years ago
Forum
Reply
RE: Linux software? and lost on a first controller

I agree with above that choosing the hardware will be an important choice. xlights works on Linux: If you want webesite interaction, you may need...

12 years ago
Reply
RE: PixLite4 vs Pixlite16 for Mega Tree & Why?

pixelpuppy wrote:power injection only one factor. Refresh rate is the other factor. Longer strings have slower refresh and the longer the string the...

12 years ago
Reply
RE: PixLite4 vs Pixlite16 for Mega Tree & Why?

Power Injection and simplicity: If you go with the Pixlite16, you can have 16 "shorter" strings connected directly to the device. if you only have ...

12 years ago
Reply
RE: DMX RGB Flood kit

Kev7274 wrote:Thanks for the replies. I just need to light up an area of around 10ft high x 50ft wide. Would this be sufficient? In the video I sha...

12 years ago
Page 4 / 5