Linux software? and...
 
Notifications
Clear all

Linux software? and lost on a first controller

10 Posts
7 Users
0 Reactions
3,081 Views
Posts: 4
Topic starter
(@apuschak)
Active Member
Joined: 18 years ago
[#36717]

Hi!

I'm a Linux admin and I used to have a 10 channel X10 display with dimming that I controlled with my own Perl scripts to serial to an X10 controller before I knew about any of these projects. I'd like to get back into it, I have about 8,000 incandescent mini lights to work with and look to go to LED in the future. I'd love to have 64 or 128 channels with dimming in the future. But first I'd just like to get started again with a handful of channels for next year, I really like dimming, and I plan to set it up to a web page and camera so friends/family can control it as well as automatic day/night on/off in software with some gentle nice animations throughout the night. I'm lost on all the options or where to start. I haven't soldered in a while, but I've had a lot of experience so building something doesn't seem difficult, but I'm not sure if a Renard 64 would be good to start with or something smaller like a Renard 8, or should I be looking at other controllers? Our budget is tight but the group buy prices are reasonable, however I don't see one for Renard happening right now.

Is there any Linux supported software? I'm not so much interested in running a display synced to music, I did that before, but more be able to code and script it myself and run that on a Linux server. Any thoughts?

Thank you for your help!

Andrew


9 Replies
MartinMueller2003
Posts: 7612
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

falcon pi player is a linux app that plays a sequence.


Reply
Posts: 4
Topic starter
(@apuschak)
Active Member
Joined: 18 years ago

Thanks! I'll look into it.


Reply
Posts: 2214
(@ctmal)
Famed Member
Joined: 19 years ago

As for the renard 64 vs the Renard 8(I'm assuming your talking about the SS8 here): I don't think the channel count is the important part in making that decision. The renard 64 is a centralized setup, meaning that is does not have onboard SSR's. The Renard SS series boards are a decentralized setup where the SSR's are onboard. So, I think the real decision is what type of setup works best for your situation.

I'd give this wiki page a look: http://www.doityourselfchristmas.com/wiki/index.php?title=7_Steps_to_Selecting_a_Controller

Then go from there.


Reply
Posts: 4
Topic starter
(@apuschak)
Active Member
Joined: 18 years ago

Hi Chris,

That makes more sense. I've gone over the wiki a number of times but I get lost trying to figure out where to get hardware or where to figure out how to put it all together. I like the idea of the SS series and just found the post announcing them which has info I didn't know on them before http://doityourselfchristmas.com/forums/showthread.php?6661-Announcing-The-Renard-SS-8-16-24-channel-controllers&p=60187#post60187 I have to run power outside anyway and I've run ethernet for servers before so I'm pretty sure I'd rather run ethernet and power to the SSRs instead of all extensions from an indoor centralized renard 64, I could be wrong though.

Would the post I linked be a good place to start buying hardware? I've spent a lot of time going through the forum, but I keep getting lost and overwhelmed with what to get or what to do.

Thanks for your help!
Andrew


Reply
Page 1 / 2
Share: