I agree with above that choosing the hardware will be an important choice.
xlights works on Linux: https://github.com/smeighan/xLights
If you want webesite interaction, you may need to customize some something. Finding implementations of DMX, LOR, and E1.31 isn't too difficult and could be implemented in multiple languages. I did a project (after reviewing xLights) to create a general abstraction layer for these protocols. See src/controller/folder in C++ if you are looking to roll your own solution. https://bitbucket.org/ghormann/gregslights
sense you are a linux admin very cool by the way you should look into a raspberry pi B and run weezy raspi and PiFm and see if you can sink music with it so you will transmit Fm but also sink lights to it if you can figure out how to contrail say a 16-Channel 12-bit PWM/Servo Driver-I2C interface-PCA9685 For Arduino and the Pi the 12I2C interface-PCA9685 is I2C controlled
sense you are a linux admin very cool by the way you should look into a raspberry pi B and run weezy raspi and PiFm and see if you can sink music with it so you will transmit Fm but also sink lights to it if you can figure out how to contrail say a 16-Channel 12-bit PWM/Servo Driver-I2C interface-PCA9685 For Arduino and the Pi the 12I2C interface-PCA9685 is I2C controlled
Falcon Pi Player takes care of the figuring out part. 🙂 it is all done for the user.
wrongway1960 wrote:... you should look into a raspberry pi B and run weezy raspi and PiFm ...
Just FYI, PiFM produces a great deal of out-of-band interference and can potentially interfere with legal transmissions. You do not want to be running PiFM.
\dmc
