sense you are a linux admin very cool by the way you should look into a raspberry pi B and run weezy raspi and PiFm and see if you can sink music with...
sense you are a linux admin very cool by the way you should look into a raspberry pi B and run weezy raspi and PiFm and see if you can sink music with...
PCA9685 is cheap easy to setup with a arduino and once programed it will keep doing what you want with out a PC just add power and off it will go pull...
16-Channel 12-bit PWM/Servo Driver-I2C interface-PCA9685 For Arduino this will also work with a raspberry pi I2C simple 16 channel servo controller s...
I have a question for all why cant you use PiFm to transmit fm audio and some how get pilightshow or something like that to turn the relays on and off...
JDAWGBAILZ wrote:I don't have the slightest bit of clue as to what I am doing when it comes to programming anything. I am trying to get my one Arduino...
halfpinter69 wrote:Hi wrongway, thanks for code works great, this is a test video iv done using x7 shift registers, only had a handful of LEDs and onl...
the on/off for the relay boards is easy just run them from some 595's they have 8 outputs and can be chained together to get all the out puts you need...
//code to use one or multiple 595 shift registers, generic serial plugin //and VixenLights #include #define SER_Pin 8 //SER_IN #define RCLK_Pin 11 ...
I read your code and mine did the same thing and I found that I had the comm port on my windowsXP machine set to 9600 baud and when I changed it to 57...
I had my lights doing the same thing,I found that the 57600 baud rate was different then what I had set in my comm port on my WindowsXP machine change...
Re: 21 channel arduino and vixen code jwhitelights wrote:hi, My Set-up is: Sainsmart MEGA 2560 with 2-13 pins pwm that should be able to fade 21-29...
Rodney D wrote:Hello si_champion Unfortunately I can't help with your issue because I have the same issue. Although it's an annoyance I just restart ...
