Thinking about getting a few kits from Holidaycoro and wanted to see what you guys thought about them.Looks like a simple assembly and the videos are a nice touch.
I know that I need the kit,housing and power supply.Any thing else you guy scan think of I might need?
http://www.holidaycoro.com/RGB-Flood-Light-p/163.htm
They are very simple to use and very easy to assemble. The amount of light that they put out isn't a great amount though. So you'll have to determine what your needs are. I have 8 this year across the front of my house and while it does illiuminate the house, it doesn't do it as well as I what I wanted. Probably going to add 8 more for next year. They are nice in the fact of their cost and it's easy to do color washes across the surface with them. When you get into the higher lumen counts, it requires less fixtures, but also limits the flexibility. Now if you have a very tall structure to illiuminate (i.e. a two store house), you'll need more than these can do or you'll have to mount some on the second story.
I used 4 of them this year (video below). Agree they are easy to assemble but put out less light than expected.
Great assembly instructions and are easy to assemble. Like others have said not as much light output. My 4 are lighting up trees and while dark still does the job. This year I might repurpose them for something else. I also use them in the Holloween display to light up some barrels in a green color.
There are better ones out there and I've been watching some of the threads about those 10w RGB's but looks like more assembly and hunting of parts which I'm not into just yet. So HolidayCoro makes it quick and easy.
Thanks for the replies.
I just need to light up an area of around 10ft high x 50ft wide. Would this be sufficient?
You will need a couple I think. Depends on the color that area is you are lighting up also.
Why not a ren4flood with the DIYC RGBW Flood and load he DMX software? The high LUX LEDs are really bright and you can make true white.
Kev7274 wrote:Thanks for the replies.
I just need to light up an area of around 10ft high x 50ft wide. Would this be sufficient?
In the video I shared the distance from the lights to the root is ~14ft. The area being lit is ~33ft. There are 4 lights. I think at 10ft height it will work (maybe a bit dark at the top) but clearly would need multiple lights (6?) t handle the width. Depends alot on how much background light you have in the area.
Example:
ghormann wrote:In the video I shared the distance from the lights to the root is ~14ft. The area being lit is ~33ft. There are 4 lights. I think at 10ft height it will work (maybe a bit dark at the top) but clearly would need multiple lights (6?) t handle the width. Depends alot on how much background light you have in the area.Example:
We need some GOOD flood lights that will light up bright. Is there anything you guys think you could get for a flood light that you could run with you're Renard controllers? Or pixel San device E6804 or E6802?
Thanks.
The 10W flood boards that RobG came up should be pretty bright and I think he has higher wattage boards on his Tindie site. It's very DIY however either way. A 10W LED is comparable to a 75W incan and a 20W is like those 150W post-in-the-ground style incan floods. Be sure that's what you want though - there are advantages to multiple smaller floods too.
