Hello i am new to the site and was happy to find this site. I have many questions about the new age of christmas lights. Last year i had about 20,000 led lights in my yard. I have gotten my first 10 - 50 nodes 12v. First question what is the difference between 5v and 12v? Also there are so many controller i dont know which one to purchase. I am going to have about 5000 nodes depending on my fiancé. I am not computer or tech savay so i need something not to difficult. This is just one of many questions. Thanks Bob
Take some time to look at the wiki for info about pixels. http://www.doityourselfchristmas.com/wiki/index.php?title=Choosing_a_Pixel_Voltage:_5V_vs_12V
The most common pixel controller for larger displays is the E682 by sandevices.com
I am ordering the light o rama music sequence with the 16 channel box for my led lights. Will this controller work with this? Thanks
bobmac,
Do some reading before you order anything. For instance the LightORama or LOR controller will cost you about 3 times more that say a Renard SS24 and you will have 24 channels instead of just 16. You buy a kit and build it yourself or just watch on the buy and sell and there are always SS boards floating around. Lots of people change thier displays and change board sometimes. As I am doing this year I will be moving to a pixel tree and will be getting rid of some of mine controllers, others will be doing this also. Dont rush into things and read a bit you will save some money for sure.
Hope this helps.
Thanks it helps. I wish i just knew more. My plan is outlining my house with WS2811 12v IP68 led pixel module 50 Count and want to do 10 leaping arches with ribbons andthe 20k led lights i have to music. so where is the best place to start? I started buying ws2811but dont know what connectors i need or what is the best program to use.
Welcome to DIYC!!! For a pixel controller on your scale start with a SanDevices E682 kit or assembled. Renard boards and LOR boards (as well as pixel controller) can be run from LOR software if your very happy with it and current (see "LOR Lagoon" here) or Vixen 3 (free and lots of support here), Vixen 2.1 (free old style grid but alot to handle with your size), HLS (free and a large user base here), to be fair I must mention LSP (it's not free and some people have trouble with it) and finally Xlights/Nutcracker player and effect generator that imports into the other sequencers and plays the final product. This product is free and may become a sequencer also this year. This has no effect on your hardware you've mentioned and future plans so far. Have fun!!!
Thanks i have not purchased any program for the music yet. My light last year were just on or off. I will look into vixen 3 i like there is support i am going to need all the help i can get. I have heard alot about e682 controller so i will start there too. Thanks for all the helpful info
you dont need too purchase a program if you use vixen 2.1 or vixen 3 they are both free too use I used vixen 3 this year http://www.vixenlights.com/ is where you can find both of them too download you can also wait and try the new redone xlights and they have a few others that are also free too use you can download and test them out without having lights or controller boards
bobmac wrote:Thanks i have not purchased any program for the music yet. My light last year were just on or off. I will look into vixen 3 i like there is support i am going to need all the help i can get. I have heard alot about e682 controller so i will start there too. Thanks for all the helpful info
