Model Design Questi...
 
Notifications
Clear all

Model Design Question

1 Posts
1 Users
0 Reactions
1,059 Views
Posts: 61
Topic starter
(@ghormann)
Trusted Member
Joined: 15 years ago
[#40643]

Hi,

For the last 15 years I've used custom software for my display and now I'm considering converting to xLights. I have a large grid (46x106 or 4876 Pixals) that takes two ALphaPix 4 controllers to control. I started each controller from the bottom corner of opposite sides and used a zig/zag pattern (see attached picture). I'm wondering how best to model this in XLights so that I can map up the controllers easily.

Left AlphaPix4 (Starts Bottom left of Grid) - 192.168.0.230
650 Channels from Port 1 (Universe 1-4)
650 Channels from Port 2 (Universe 5-8)
650 Channels from Port 3 (Universe 9-12)
326 Channels from Port 4 (Universe 13-16)

Right ALphaPix4 (Starts bottom right of Grid) - 192.168.0.231
650 Channels from Port 1 (Universe 1-4)
650 Channels from Port 2 (Universe 5-8)
650 Channels from Port 3 (Universe 9-12)
326 Channels from Port 4 (Universe 13-14)

The AlphaPix4 should support verse addressing, but to be honest I've never tried it and handled it in software last year.

Thanks for your advice,
Greg

Grid Layout

Share: