Try decreasing the brightness of the candy canes and see what happens. It could be a voltage drop issue.
The manual may help you. There are a lot of options, but I just set the Type and which Timing Track to link it to.
I use Timing Tracks with the VU Meter effect.
Do a search for xlights_rgbeffects.xml.....should at least point you to your show folder.
The image isn't the best, the flash washes things out. I see a couple of solder points that don't look good. I would go along and re-flow each of the ...
If you soldered this up yourself, I suggest posting a picture of the backside of the board. I've soldered up a bunch of these over the years and cold ...
If you're going to use all 16 then you should have '4' in each of the outputs under "outputs in use". Your current setup should have universe 4 391 ...
Make sure you have DNS server settings on the network page setup. I believe that two most common ones used are 8.8.8.8 and 8.8.4.4
That's the way most setup their show network. The FPP manual and Canispater Christmas videos explain the setup in detail. Check them out.
I would do the update (you're going to want to regardless) then test.
For a quick fix....set them up horizontal in Vixen then turn them vertical in your yard. I played with one and I see what you're talking about....hope...
Did you set the grid up as vertical or horizontal in the Preview setup?
When you say 'vertical' do you mean 'stacked'? If so, change Text Layout to stack and direction to up.
