I'm trying to get the FPP on my Kulp K8-PB to pull the correct time from the NTP Server but it doesn't seem to be working. I tried using time.google.com as the NTP server but the time is still not correct. The attached screen shot was taken at 10:11:27 PM EDT and the clock in FPP says 4:45:28 EDT.
Any ideas on what I'm doing wrong or how to get my FPP to actually sync the time? I was planning on shutting down my Kulp board every night as to not constantly send power to my lights during non-show hours but if I can't get it to sync the time each time the controller powers on I might just leave it on for the whole season.
Thanks,
-Russ
If you are going to use NTP, then why are you telling it to use the RTC? Try turning off the RTC setting on that page and see what you get.
Have you also verified that you have internet access?
Sent from my iPhone using Tapatalk
MartinMueller2003 wrote:If you are going to use NTP, then why are you telling it to use the RTC? Try turning off the RTC setting on that page and see what you get.
I honestly had no idea what I was doing haha and didn't realize that was two different protocols. I just left the default Kulp RTC setting in there but I'll try removing that and see what happens.
I definitely have internet access, the FPP screen header stated excellent WIFI connection at the time I took that screenshot.
You SHOULD be able to use ntp and RTC at the same time. I cant remember if the NTP fires once a day (or more often) to refresh the rtc. You may have been ok if you simply left it on for a while. But removing it will tell you whether the NTP system is working.

