Thank you. I think I will just build the frame with feet and secure it into the ground. Don't want to drill into the house.
Thanks. I'll give this a try and let you know if I get it to work. isotope wrote:Sorry for the late response; this is a spare time project for me. ...
Kintara wrote:Solved. A few things I had to do to get it working: 1) I had not set the ESP32's ip address correctly - The wifi router was 192.168.0...
Hereis a link to the code. There is code to run on an ESP32 and code to run on a Teensy 3.2. You probably can combine the code to run all from an ESP3...
isotope wrote:At the expense of resurrecting this thread, I'd just like to mention, for anyone using NodeMCU or other ESP8266 hardware, that I've adde...
I have not done anything to account for latency but if there is any I can't notice it. The music and pixel output is perfectly synced. Here is the c...
Whenever I use AC relays, I always put a varistor between the two switched leads on the relay. The varistor absorbs any voltage surges that can be sen...
rjchu wrote:Details please? Thanks, -Joni- Here is the code. I tested this on a Wemos D1 R2 and it works great as well. This code uses Materdaddy'...
Also works great passing E1.31 data received over WiFi to a Teensy 3.2 over serial for driving a large number of pixels.
I'm using a NodeMCU receiving a single E1.31 universe to drive the GWTS ears and it works great. I also figured out fading up and down and have incorp...
oceanwanderlust wrote:Shouldn't the FastLED Arduino library work on the ESPixelStick? FastLED works fine on my old Uno, and my WS2811 lights work fine...
