Notifications
Clear all

Esp32

6 Posts
5 Users
0 Reactions
12.8 K Views
Posts: 116
Topic starter
(@djred2000)
Estimable Member
Joined: 13 years ago
[#46009]

Anybody using the ESP32 in their setup? I just got a few in and they work great at receiving E1.31. FastLED also supports it now if you want to drive pixels directly.


5 Replies
Posts: 5
(@ragoth)
Active Member
Joined: 8 years ago

Dear Sir, would you mind sharing the code for me try out E1.31 and to drive pixels.


Reply
Posts: 401
(@kensington)
Reputable Member
Joined: 11 years ago

There are several different projects you can copy. The following is a e1.31 receiver using the esp8266: https://www.hackster.io/jasonspiva/esp8266-e1-31-multiplexing-pixel-controller-002072

The ESP32 will run the same code provided that it is flashed to the Arduino IDE. Shelby Merrick (forkineye) and Bill Porter also have published their libraries and code that are used in the ESPixel line of controllers. Look for their stuff on github.


Reply
Posts: 5
(@ragoth)
Active Member
Joined: 8 years ago

Thank you Mr.Kensington, I am already using Jasonspiva's ESP8266 multiplexing Pixel controller and it works fine. But when I compile the same code for ESP32, it gives lot of compiling error as ESP32's library's are different, it seems. Please try it yourself and help me with a solution. Thanks in advance.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

I use multiple ESP32 based controllers in my show. They are running ESPixelStick V4 Software which also supports playing from an SD card (significantly reduces WiFi traffic)


Reply
Page 1 / 2
Share: