Activity
 
Notifications
Clear all
cullen_ryan
@cullen-ryan
Eminent Member
Joined: Dec 17, 2012
Topics: 3 / Replies: 28
Reply
RE: Helix Development and Issues

I'm talking with Jim at the moment, cause from what I can see it might be a difference in the software on the E862 compared to the E8604 that is causi...

12 years ago
Reply
RE: Helix Development and Issues

Out of interest, as I understand the 16 output connectors are grouped into 4 groups. With the E8604 it has 4 out connectors which are not grouped at ...

12 years ago
Reply
RE: Emulate multiple controllers with the Parallax propeller

RogerH wrote:Joe, is there a thread or link to using a serial protocol. I did look... but didn't notice anything about using serial. a lot of threads ...

12 years ago
Reply
RE: Helix Development and Issues

Brain, I have had mine v3 overheat once, but being in Australia, where I am the summer days can get above 40 degree's. I installed some cooling fans...

12 years ago
Topic
Replies: 9
Views: 16684
Reply
RE: Re-shipping companies for Holiday Corro products

Hi Matt, I have used one in the past (shipitto.com) it worked out really easy and was extremely happy with them. For the minimum cost of them forwar...

12 years ago
Reply
RE: Helix Channel Order Help

No there isn't. You need to setup the vixen display exactly the same as your boards. So if you are using three daughter boards you need to have 96 cha...

12 years ago
Reply
RE: Helix Ether-Node Controller

Just out of interest, you have got the termination jumper on the ethernode as I assume it is the last board in the chain.

12 years ago
Reply
RE: converting vixen 3 sequence to 2.1?

Hey Bernard, It is possible in the latest release of Vixen 3.1u2 and I think 3.1u1 as well. Open up your sequence, and click on sequence on the tool...

12 years ago
Forum
Reply
RE: Aliexpress (Including RayWu) purchases this later in the season.

I ordered late last year, mid November from Ray and had all the items in less than a week. Found that a few items had been missed from the order and a...

12 years ago
Reply
RE: Helix Ether-Node Controller

Thanks guys for your help, all up and running now. I need to slap myself I forgot to put on the two jumpers on the ether-node on the prop plug. Once ...

13 years ago
Reply
RE: Helix Ether-Node Controller

Thanks Guys, Have done that, checked all boards are running Unicast. I'm using 1 universe 279 Channels on Socket 1, 1 universe 492 channels on socket ...

13 years ago
Reply
RE: Helix Ether-Node Controller

Still no luck, changed them to run from channel 1 on universe 1 then filling the full universe but still nothing. Is the link lights suppose to light ...

13 years ago
Reply
RE: Helix Ether-Node Controller

And the 3rd Pixel Controller Setting Page

13 years ago
Reply
RE: Helix Ether-Node Controller

Hi All, just having a few issues with my ether-node setup. Have gone through and done a test sequence in vixen 2, uploaded the files through superviso...

13 years ago
Page 1 / 3
Share: