new mega tree issue...
 
Notifications
Clear all

new mega tree issues, looking for help

5 Posts
3 Users
0 Reactions
903 Views
Posts: 247
Topic starter
(@bcer960)
Reputable Member
Joined: 10 years ago
[#58399]

I have had a 16 X 43 light mega tree for a couple years. This year I decided to double the lights to a 32 X 43 light tree. To do this I connected every other strand to the top of the existing strand. I.E strand 1 starts at the bottom left and goes up, it is connected to strand 2 at the top, and strand 2 comes down. 3 up, 4 down etc. I have only the odd # strands connected to a E682, using all 16 outputs. In Vixen I patched the first strand, then revesed the second strand and so on for them all.

Here's my issue.

The first 9 strands all work correctly. But on strand 10 pixel 34 also lights up pixel 1 on strand 11. # 35 is lighting up # 2 on starnd 11 etc. So, I unpatch everything and repatch it. No change. So, I unpatch stands 10 - 15. And this time I patch each individual bulb only on strand 10. No change. So the weird part is, strand 11 is not patched, but still lighting up.

Any ideas???

I should say I am using Vixen 3.11u1

Thanks
Ray


4 Replies
Posts: 429
(@mikekrebs)
Reputable Member
Joined: 12 years ago

Are you sure you are patching to the order they are connected and to the way you have the E682 configured?


Reply
Posts: 247
Topic starter
(@bcer960)
Reputable Member
Joined: 10 years ago

Mike,

First I was patching by string. So the order of the pixels wasn't in question. I reversed (by check box) the even numbered strings.
But when I patched just string 10 (with the reverseed check box ticked) I started at pixel one. maybe I should have started a pixel 46.

But why would the first 9 strings work correctly?


Reply
joeytx
Posts: 249
(@joeytx)
Reputable Member
Joined: 19 years ago

Patch them as is to the E682 and use the zig-zag feature on the Outputs to invert the second string. That would eliminate any patching issues.

MegaTree 79 2 dwn

Reply
Posts: 247
Topic starter
(@bcer960)
Reputable Member
Joined: 10 years ago

Thank-you, I will try this tonight and report back.


Reply
Share: