I've probably asked this before, but what is the resolution of the timer used for sending data for controllers to send data to either directly-attached controllers or network controllers? I'm assuming that it's on the order of 0.5 ms to 1 mS rather than the Windows default of 15.625 mS.
The resolution of the timer used to calculate the next update time is actually in nanoseconds, but there are other factors that limit the sample accuracy to 1-2 milliseconds assuming you have enough processing power to keep up with everything. This is for real time updates to the controllers. The Pixel type effects have a resolution that matches the update interval in Vixen. I.E if it is set to 50 ms, the data for those effects is created in frames that span 50ms each. Depending on alignment and when the sample interval occurs you could have some leeway in the overlap of frames within multiple effects. The basic effects are generally more accurate since they are stored with linear interpolation and can be sampled more accurately.
When doing exports of frame data to a file for something like FPP, the accuracy is much better because the sample time is specific on the interval exported. But you still have the resolution of the frame data and alignment in the effects that actually governs what the real data is.
