The problem with 5V pixels is that a small loss will cause them to fail. Using 12V solves that at the expense of wasted power. With 12V you can push 100 pixels spaced at about 8". To do that with a 5V pixels would require a fairly large wire gauge.
So it's a catch 22. Lower the voltage and you cannot drive long strings, run 12V and you can push longer feeds and string lengths.
I've got some ideas I'm working on but it's not perfect either. Oh if we could only get a micro switcher in the pixels, I'm looking for a way to do that.
I found a SO08 part that's good for 100ma. Really need the new 8mm LED with a WS2811 inside to keep the size down.
I kinda like the wasted heat. It helps melt snow off the lights.
Being in Southern California I never thought about that.

