I have F16V2-R if you are interested.
Mudsculpter wrote: There was mention of making this site a read only. I hadn't considered this before. As long as it is searchable and an area that qu...
Why not take old posts and create read only site? I did something similar for a site I managed for many years. Once the interest went down and maintai...
I am not talking about voltage drop on data line, but the GND line. Voltage drop on GND rail will be the same as on V+ and data level will decrease, b...
I have a hosting package and using maybe 1% of its potential. I would be more than happy to host this site if the traffic/data size doesn't exceed wha...
You forgot to mention one more thing, voltage drop. WS2811 data is 5V. When you have long runs and many pixels at the end, voltage will drop on both, ...
Heat gun is the best, especially for SMT. If the part is through hole and is big, I use soldering iron with sucker, then wick if needed, then either i...
Mudsculpter wrote: What involved in transferring ownership of this site to allow continued access.There might be an interest in turning over the reins...
I did something similar back in the day, the idea was to eliminate problems with WS2811 data transition. Data was sent over regular serial wire (inclu...
Hi Bob, My implementation is limited to 8 channels, but you can daisy chain several boards to whatever you need, 8, 15, 22, 29... It all started in 20...
Almost there...
This is how the router works. Let's say you program it to send 3 pixels to ch1, 4 to ch2, and 5 to ch3. First 3 pixels from data stream are sent to c...
algerdes wrote: One question. In the video the pixels are only lighting up "so far" on each of the strips (and it appears to be varied), then going o...
Imagine you have a tree and 8 long strings of 100 pixels on each branch. To control them, you would need to use 8 channels or run data from each strin...
BillW wrote: Something new has been added: A delete and edit link to the post. Progress! I have been absent for few years and just made a post. I wa...
