Source for ESP modu...
 
Notifications
Clear all

Source for ESP modules

40 Posts
17 Users
0 Reactions
29 K Views
Posts: 360
(@jlstout)
Reputable Member
Joined: 16 years ago

I returned the ones that I bought and didn't use. I really don't want to have to mess with it. I need them all to work with the same firmware load.

Just having bad luck with these. I'll figure it out eventually.


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
JLStout wrote:I returned the ones that I bought and didn't use. I really don't want to have to mess with it. I need them all to work with the same firmware load.

Just having bad luck with these. I'll figure it out eventually.

You will gain valuable experience by messing with it !


Reply
Posts: 360
(@jlstout)
Reputable Member
Joined: 16 years ago

I hope so Angus. I am trying to get 15 of these to work for my house and my neighbors house. Strings already done, sequences done for the most part, just cant get these things to work right. New modules hopefully today or tomorrow.


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

You will overcome this minor hurdle 🙂
I experimented with these for months in spare time to get an understanding of how to program them with various methods
and firmwares.

One thing to keep in mind with these and most all other wireless hardware being used for this hobby , it will not be as reliable as directly wiring to a device .
It would be a gamble to bank on a flawless performance from these modules for a complete light show .

best of luck to you


Reply
Posts: 188
(@harpster)
Reputable Member
Joined: 17 years ago

It's not just Puya with the problem. I recently got 20 ESP Modules on AliExpress and from photo I was pretty sure it didn't
have the Puya Flash...

Model Number: Upgraded version ESP-01 ESP8266 serial WIFI wireless module wireless tranciever
Brand Name: ACELEX
Price: US $1.62 / piece

... when I received the modules I checked and the Flash branding was MK. They programmed OK but after programming would not boot in DHCP mode, in fact there was NO output (text) in the serial output window (was blank). I tried a few of the modules and same result so I ordered Windbond Flash chips from Digikey... DK part number W25Q80DVSNIGCT-ND (cut tape). I received today, changed a few and that fixed the problem... they programed went into DHCP mode I and was able to connect to module from my browser. Looks like this will be resolved at some point but I didn't feel like waiting. So beware of the MK branded Flash chips and for now look for a Flash chip that is proven
.

MK Flash

Reply
Page 6 / 8
Share: