Source for ESP modu...
 
Notifications
Clear all

Source for ESP modules

40 Posts
17 Users
0 Reactions
29 K Views
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Wow,
What a PITA.

harpster wrote:It's not just Puya with the problem. I recently got 20 ESP Modules on AliExpress and from photo I was pretty sure it didn't
have the Puya Flash...

Model Number: Upgraded version ESP-01 ESP8266 serial WIFI wireless module wireless tranciever
Brand Name: ACELEX
Price: US $1.62 / piece

... when I received the modules I checked and the Flash branding was MK. They programmed OK but after programming would not boot in DHCP mode, in fact there was NO output (text) in the serial output window (was blank). I tried a few of the modules and same result so I ordered Windbond Flash chips from Digikey... DK part number W25Q80DVSNIGCT-ND (cut tape). I received today, changed a few and that fixed the problem... they programed went into DHCP mode I and was able to connect to module from my browser. Looks like this will be resolved at some point but I didn't feel like waiting. So beware of the MK branded Flash chips and for now look for a Flash chip that is proven
.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
harpster wrote:It's not just Puya with the problem. I recently got 20 ESP Modules on AliExpress and from photo I was pretty sure it didn't
have the Puya Flash...

Model Number: Upgraded version ESP-01 ESP8266 serial WIFI wireless module wireless tranciever
Brand Name: ACELEX
Price: US $1.62 / piece

... when I received the modules I checked and the Flash branding was MK. They programmed OK but after programming would not boot in DHCP mode, in fact there was NO output (text) in the serial output window (was blank). I tried a few of the modules and same result so I ordered Windbond Flash chips from Digikey... DK part number W25Q80DVSNIGCT-ND (cut tape). I received today, changed a few and that fixed the problem... they programed went into DHCP mode I and was able to connect to module from my browser. Looks like this will be resolved at some point but I didn't feel like waiting. So beware of the MK branded Flash chips and for now look for a Flash chip that is proven
.

I just had the joy of changing out 10 more of those non puya, no boot flash/memory chips. dirknerkle shared his replacement process of clipping the old chip out, and dealing with a single pin at a time. This keeps from damaging the solder pads. That worked great.....just wish he had a solution for soldering. When I do these SMD components with a soldering iron, I seem to get an onset of shaky-hand until I get the first pin of each chip nailed down.

I tried backing down to v2.0 but didn't help those I receive.

I had failures and water damage ESP's so without a reliable source for replacement ESP's (reasonable priced) I'm looking for something to replace the ESPixelSticks (Renard ESP too) with something we have more control of.....maybe Dan Kulp's pocket Beagle Bone setup. One source software(FPP) and hardware.


Reply
DrNeutron
Posts: 2016
(@drneutron)
Noble Member
Joined: 14 years ago
mrGrumpy wrote:I just had the joy of changing out 10 more of those non puya, no boot flash/memory chips. dirknerkle shared his replacement process of clipping the old chip out, and dealing with a single pin at a time. This keeps from damaging the solder pads. That worked great.....just wish he had a solution for soldering. When I do these SMD components with a soldering iron, I seem to get an onset of shaky-hand until I get the first pin of each chip nailed down.

I tried backing down to v2.0 but didn't help those I receive.

I had failures and water damage ESP's so without a reliable source for replacement ESP's (reasonable priced) I'm looking for something to replace the ESPixelSticks (Renard ESP too) with something we have more control of.....maybe Dan Kulp's pocket Beagle Bone setup. One source software(FPP) and hardware.

Have you looked at Jeremy's boards? https://jboards.ecwid.com/ESPixNode-p127558674
Also, I think Uke is working on a similar board that uses a NodeMCU as well.
I am in same boat but haven't had any issues with my ESP-01's as of yet, so not as pressing to find replacements.....


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

I am not so sure that NodeMCU's are also prone to these issues.
They too have a memory chip.
Maybe the temptation to use crap memory is less with these units?
Only time will tell.

DrNeutron wrote:Have you looked at Jeremy's boards? https://jboards.ecwid.com/ESPixNode-p127558674
Also, I think Uke is working on a similar board that uses a NodeMCU as well.
I am in same boat but haven't had any issues with my ESP-01's as of yet, so not as pressing to find replacements.....

Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
DrNeutron wrote:Have you looked at Jeremy's boards? https://jboards.ecwid.com/ESPixNode-p127558674
Also, I think Uke is working on a similar board that uses a NodeMCU as well.
I am in same boat but haven't had any issues with my ESP-01's as of yet, so not as pressing to find replacements.....

Yes, DrNeutron, I have looked at the ESPixNode and like what I see, but we cannot rely on China to maintain its current design....will the PUYA influence lock it out of our use as the ESP-01. Only time will tell.
I will buy a few of these (in the near future) just to have, and maybe use as back-up or spares.
I do have plenty extra/spare ESPixelSticks, Renard ESP and ESPixel POPS to last years, each with tested/programmed spare ESP-01. Just always looking for something better.


Reply
Page 7 / 8
Share: