Source for ESP modu...
 
Notifications
Clear all

Source for ESP modules

40 Posts
17 Users
0 Reactions
29 K Views
Posts: 4
(@willo)
New Member
Joined: 9 years ago
thomashp wrote:What are the symptoms of a puya chip? I just got a batch in from amazon that I am having issues with. The chip does not say Puya, but "BoyaMicro". The java flash tool says programming complete, but the chip never joins the wifi.

For me the Puya chip acted exactly like Ruppro said:

"It will accept the initial Java flash tool load but if you make any changes via the web UI they do not save and the whole ESP will start acting screwy."

I could flash fine and start up. I could go to the web interface and "save" a config. But the config was never saved to flash -- on a reboot or power cycle the ESP would not find its config and thus it could never find the wifi SSID/password and would never come back up. Acts the same with the java flash tool OR building the source and flashing from the Arduino IDE.

If you are unable to flash from the java tool at all you probably have a different problem. Make sure you have a flash hardware setup with a super-solid 3.3v source (lots of other threads on this) maybe.


Reply
Posts: 360
(@jlstout)
Reputable Member
Joined: 16 years ago

I have a whole bunch that I bought last year from Spark fun that also program, and won't join the network. Just bought some replacement ESP modules from amazon, hope they don't do the same thing. I am programming with the Java flash tool.


Reply
Posts: 9
(@thomashp)
Active Member
Joined: 8 years ago

I just returned those a ESP-01's that would not connect to wifi back to amazon. I have been fighting with them for a week with no luck. Does anyone have a reliable US seller for these modules?


Reply
Posts: 116
(@coaster)
Estimable Member
Joined: 15 years ago
thomashp wrote:I just returned those a ESP-01's that would not connect to wifi back to amazon. I have been fighting with them for a week with no luck. Does anyone have a reliable US seller for these modules?

When the ESP starts up it outputs status information on the serial output. What did the output say? On your wireless router do you have 2.4Ghz enabled or just 5Ghz? ESP will not work with the 5Ghz wifi just 2.4Ghz.


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
thomashp wrote:I just returned those a ESP-01's that would not connect to wifi back to amazon. I have been fighting with them for a week with no luck. Does anyone have a reliable US seller for these modules?

Were they defective ? How could you stand your ground in a dispute ?
Did you try AT commands on them to determine if they worked as designed ?


Reply
Page 2 / 8
Share: