Source for ESP modu...
 
Notifications
Clear all

Source for ESP modules

40 Posts
17 Users
0 Reactions
29 K Views
Posts: 1267
Topic starter
(@xmasinvancouver)
Noble Member
Joined: 10 years ago
[#49532]

Looking at building some pixel sticks as laid out on the forums. Have my BOM setup, tried to read through that massive thread, but there is one problem i'm having. I need to keep the price of the ESP modules down due to other expenditures, so ali express seems to be the place. However, I can't seem to tell or find out which of them is possibly the module that works for this application. If I understood correctly, some of the esp modules have a part that makes them useless for this build, but i'm not feeling confident in what i'm ordering being correct. Can anybody point me to a vendor, link etc... on ali express or another source with good pricing on these modules? The depth of the main threads makes it hard to really get all the information needed, although the wiki is quite useful in most respects


39 Replies
kwoodard
Posts: 281
(@kwoodard)
Reputable Member
Joined: 13 years ago

Here is where I've always purchased the modules:

https://www.itead.cc/esp8266-serial-wifi-module.html

$1.99 each and very reasonable shipping. Never had a problem with any of the modules I've received, although I haven't ordered any in the past several months.


Reply
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

The only thing you have to watch out for is a lot of the ESPs are using a Puya flash memory chip. It will accept the initial Java flash tool load but if you make any changes via the web UI they do not save and the whole ESP will start acting screwy.


Reply
Posts: 4
(@willo)
New Member
Joined: 9 years ago
Ruppro wrote:The only thing you have to watch out for is a lot of the ESPs are using a Puya flash memory chip. It will accept the initial Java flash tool load but if you make any changes via the web UI they do not save and the whole ESP will start acting screwy.

If you are building the forkineye/ESPixelStick project from code, you can manually patch the code in ESP flash write function in the arduino/esp8266 with the snippet from here: https://github.com/esp8266/Arduino/issues/4061#issuecomment-428007580 The Arduino IDE people have patched for the Puya issue earlier this year, we're just now waiting for the SPIFFS code people to do the same. To build from code you just need to be diligent about installing all the dependent Arduino librariies and the somewhat funky node.js/gather setup for the integrated web server setup. The README really does give everything needed it just takes some time to work through all of it.

My first batch of ESP8266 (from amazon) are Puya so I was motivated to figure this out! Tested and working!


Reply
Posts: 9
(@thomashp)
Active Member
Joined: 8 years ago
willo wrote:If you are building the forkineye/ESPixelStick project from code, you can manually patch the code in ESP flash write function in the arduino/esp8266 with the snippet from here: https://github.com/esp8266/Arduino/issues/4061#issuecomment-428007580 The Arduino IDE people have patched for the Puya issue earlier this year, we're just now waiting for the SPIFFS code people to do the same. To build from code you just need to be diligent about installing all the dependent Arduino librariies and the somewhat funky node.js/gather setup for the integrated web server setup. The README really does give everything needed it just takes some time to work through all of it.

My first batch of ESP8266 (from amazon) are Puya so I was motivated to figure this out! Tested and working!

What are the symptoms of a puya chip? I just got a batch in from amazon that I am having issues with. The chip does not say Puya, but "BoyaMicro". The java flash tool says programming complete, but the chip never joins the wifi.


Reply
Page 1 / 8
Share: