Notifications
Clear all
XmasinVancouver
@xmasinvancouver
Noble Member
Joined: Nov 14, 2016
Topics: 221 / Replies: 1046
Reply
RE: Weird issue with 200 count LED string and LED keeper results

MikeKrebs wrote:In section 2, it seems to me to indicate a ac to dc power problem. Hmmmm. I mean technically with the LED keeper I'm feeding DC fro...

4 years ago
Forum
Reply
RE: Recommendations for "meteor tube" /icicle effect with xlights

Sorry couldn't get better examples in the gif's above. But here for example is the settings I used in vixen with a chase effect for the first posted....

4 years ago
Forum
Reply
RE: New house layout planning

Red area not part of the property

5 years ago
Topic
Replies: 3
Views: 1344
Reply
RE: Esp32-cam won't boot/connect if any buffer data input is connected to board outpur

MartinMueller2003 wrote:The data buffer, when placed close (within 10cm) to the ESP acts as a level shifter. Any voltage above 2.7v on the buffer will...

5 years ago
Reply
RE: Esp32, 12v pixels and a buffer layout question

MartinMueller2003 wrote:There has been a lot of discussion on this and there are many factors. Here is what I have found: The wire you use matters. I ...

5 years ago
Reply
RE: Esp32, 12v pixels and a buffer layout question

MartinMueller2003 wrote:leave it set to 12v. Power inject 12v at the first pixel. Run First pixel V+, First Pixel V- and first pixel data back to the ...

5 years ago
Reply
RE: Esp32, 12v pixels and a buffer layout question

MartinMueller2003 wrote:Original version of the buffers needed you to select 5v or Greater than 7v I finally received the mystical buffers! Hallelu...

5 years ago
Reply
RE: Esp32 Cam-module programmer made useable.

angus40 wrote:Yes ,desoldered the headers and install the longer pin headers . A caution on a trace at Pin D0 , it is very easy to break when desolde...

5 years ago
Forum
Page 1 / 85
Share: