Here is a quick solution to using these as a complete unit .
angus40 wrote:Here is a quick solution to using these as a complete unit ./div>
Sorry tiny screen. Did you just desolder the existing rails on the cam module programmer and resolder the ones you had? More importantly, have you run into any issues when it's powered by it's usb carrier board when outputting? I've had no issue powering them in their carrier board with usb in terms of them staying online and connected, but I haven't tried to actually run any pixels off of it when powered this way. I also remembered something being mentioned about the carrier boards for the esp32-cam's possibly causing problems that aren't the case when not connected to it. I believe someone working on the firmware mentioned weird behavior with communication in testing. Very tempted to try your idea if there's not drawbacks found
Yes ,desoldered the headers and install the longer pin headers .
A caution on a trace at Pin D0 , it is very easy to break when desoldering .
I power the board by the 5v pin -> a treat . 🙂
angus40 wrote:Yes ,desoldered the headers and install the longer pin headers .
A caution on a trace at Pin D0 , it is very easy to break when desoldering .I power the board by the 5v pin -> a treat . 🙂
Ohhhhhh, your not using the usb port on the carrier board for power. Thanks for the heads up on the trace. Off to the mailbox to hold my breath Canada post delivered the small envelope with pixel buffers that were sent over a month ago lol
