Part of my pixel string stopped working last night and I discovered this fried node this morning - ideas on how that happens?
I cut it out and jumpered wires to the next node - everything worked.
Next, I took another node and spliced it in. The string worked up to and including the spliced in node.
However, all the nodes after the spliced in one did not work.
Ideas?
MikeKrebs wrote:Wow, that is a reportable! Where did they come from?I would suggest that the output splice is not good for some reason. You might need to redo the splice. You could also have a bad output on the spliced in pixel. Was it tested as passing data?
Second that! That is not just a little poof or a smidge or deforming. Obviously difficult to make out with the type of cover, but if you get a chance, try to see the solder points in that node. See if there is bridging or poor connections....Something to explain that
covewi wrote:Part of my pixel string stopped working last night and I discovered this fried node this morning - ideas on how that happens?I cut it out and jumpered wires to the next node - everything worked.
Next, I took another node and spliced it in. The string worked up to and including the spliced in node.
However, all the nodes after the spliced in one did not work.Ideas?
First thing I would do in this case is check voltage and continuity on the end of the line. Are you still getting proper or any voltage at the end? Check continuity on the data line. I would say after the spliced node, but that would likely require tapping in or cutting the string. What kind of node did you splice in? Have you confirmed it's the same type, same voltage and just as easy to mistake, correct direction? If all of the above is tested and confirmed, try re-doing the connection from a fresh cut if possible. Still nothing? Try a different node. Keep us posted. Curious what it ended up being
Thanks for all the advice. I did not have the exact same kind of node to splice in so I tried a bullet node instead that was laying around.
That node worked however, the colors were all wrong.
I decided to just leave that missing node out this year - its in a space where only I would notice it. Maybe I will order more of the same from Ray Wu and repair it for next year.
Covew

