I use 3 E682s, Unicast, and Vixen. I continue the numbering so there is no overlap leaving space between each group. This avoids issues from Vixen through controller. A slight correction to pmiller's post, multicast allows 7 universes on an E682 and 12 for unicast.
Leaving all 12 universes per E682 only makes sense for expansion. I just wasn't sure is each E682 started at 1, or if they continued on. I'll never get there, but is ther a max amount the system can run?
You're not going to get there...
There's a address limit of 63999 universes per network. But modern networks can't come close to handling that number. several hundred is definitely possible though.
Vixen doesn't impose a limit. But you will run into system resource issues at some point. And that point depends a lot on the computer you're running it on. There are people who are pushing 100,000 channels with some careful planning. That's almost 200 universes. I've also heard of 500,000 channel shows, but that requires dividing things up both in sequencing and in playback to accomplish it successfully.
As an example of one method of numbering:
We use an IP address to universe method.
192.168.2.103 has universes starting at 300
192.168.2.104 has universes starting at 400
192.168.2.110 has universes starting at 1000
192.168.2.111 has universes starting at 1100
etc.
(Essentially the last two digits of the IP are the first two digits of the universes. Note there is no need to put the zero in front.)
We do try to make channels contiguous, but there are gaps in them as well for future additions.
This made/makes it extremely easy to keep track of what was on what controller. Once you get 20+ controllers in the field, it can get to be "fun".
Of course, a record keeping method is a necessity. We use a spreadsheet.
At present we have 7 E682s in the field, along with a bunch of others. Love those things - they are solid!
Wow to both comments.
I only have a small yard. I cannot see going past the second E682 (ya right everyone is saying, while rolling their eyes)
algerdes wrote:As an example of one method of numbering:
We use an IP address to universe method.192.168.2.103 has universes starting at 300
192.168.2.104 has universes starting at 400
192.168.2.110 has universes starting at 1000
192.168.2.111 has universes starting at 1100
etc.
(Essentially the last two digits of the IP are the first two digits of the universes. Note there is no need to put the zero in front.)We do try to make channels contiguous, but there are gaps in them as well for future additions.
This made/makes it extremely easy to keep track of what was on what controller. Once you get 20+ controllers in the field, it can get to be "fun".
Of course, a record keeping method is a necessity. We use a spreadsheet.At present we have 7 E682s in the field, along with a bunch of others. Love those things - they are solid!
I like this method too. I like use 1000 numbers. where the last 3 digits are universe on that device, and the first numbers are the controller number. The only problem with this method is that there are some controllers out there that cap out at 99 or 999 for universe number. That's just a device firmware limitation. But it is possible to run into it.
bcer960 wrote:Wow to both comments.
I only have a small yard. I cannot see going past the second E682 (ya right everyone is saying, while rolling their eyes)
We are only prepping you for when you move your show from your house to your local park or near-by shopping center. :spox:
ok, ok.... let me get this one going first.
bcer960 wrote:Wow to both comments.
I only have a small yard. I cannot see going past the second E682 (ya right everyone is saying, while rolling their eyes)
I have a small yard as well, and currently run 3 E682 controllers: 1 to run the 12 string (100 nodes each) mega tree + 1 string (90 nodes) star, 1 to run all the house lights (about 600 pixels total, 9 outputs), and 1 to run my 8 mini-trees (70 nodes each) + 4 arches (60 nodes each). Unless I do some combining of outputs, I don't have much room to add any more outputs to my controllers (well, actually the 1st controller has only 9 outputs and I am planning on adding 6 more outputs to run some Boscoyo snowflakes for a total of 15 outputs).
I was joking about not needing more, I know this is an addiction, and it will grow. Just need to get the first year happening....
