Pixels drawing 5 ma...
 
Notifications
Clear all

Pixels drawing 5 ma each while dark?

13 Posts
5 Users
0 Reactions
4,283 Views
David_AVD
Posts: 991
(@david-avd)
Noble Member
Joined: 17 years ago

I automatically switch my power supplies on and off each night with the aid of a DMX controlled mains relay board I made.


Reply
Posts: 1076
 Zeph
Topic starter
(@zeph)
Noble Member
Joined: 15 years ago

My latest code will do that - once the relays I ordered arrived and I get it wired up.

Mostly to protect the batteries in my summer camp=out coming up.


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
Zeph wrote:the battery continued to drain even after I went full dark, so I put the multimeter on and found about half an amp drain (0.06 A for the controller, 0.57 with the lights too).

Wow, that's far more than I expected - about 5ma/pixel while dark. (Full on should only be about 30ma each)

This could actually be helpful if used with a SMPS - then you wouldn't need to use a ceramic resistor or other device to maintain the minimum load.

don


Reply
Page 2 / 2
Share: