I looked at this thread and dont see the px-1 I found these too be simple too use just like normal renard protocol channels each px-1 does 200 pixels 600 pixel channels others have tested it up too 255 pixels 765 pixel channels I ran 2 of these with power injection for a half pixel tree and pixel star for my first year
jcmarksafb wrote:I use the SanDevices 682, one reason is it can be ordered as a kit which saves me money and I enjoy building kits. Like Sean said it depends on the pixels you want to use. I use ws2811 strips/strings in my display. You really can't go wrong with your first controller, they all work well and you will learn much more just jumping in and playing with the hardware/software than just reading about it. There is no ultimate software/hardware, each does different things better. Jump in and have some fun!
John
I jumped in this January 2015 with a e6804, then added a TR24...Using Vixen 3. Wow, this stuff is addicting. Now I need a bigger house, and more land!
I need a bigger trust fund, esp since I don't have one at all. I use Lynx and Falcon products to control all my pixels.
I, too, am new to this hobby and have been reading a lot trying to figure out where to start. I was leaning towards a 2-3 of the 1 universe controllers until the post came out with the 16+ controller comparisons. After many days of obsessive forum reading, I am not sure I am any closer.
I keep looking at the Falcon16-Beagle which has so many universes and its cost looks good if I can grow into it for a few years. I plan to run my show off Falcon Player as I do not have a dedicated computer for this task. So can this Falcon Beagle run the show, run the lights (if I buy WS2811 / WS2812), and has 8 Dedicated Outputs RJ45 that I read to mean I can run other kinds of light controllers off (if I want something other than the WS2811).
If that is the case (please set me straight where I am wrong), what is the downside? I thought maybe the distance from the controller to the first pixel might be a factor but did I read somewhere that they were stringing the first WS2811 pixel 50' from the controller.
One downside is that they are not out until summer. I did purchase a Komby Sandwich, which I can play with now, but I have pre-ordered more lights than fit on 1 universe. As for the future... who knows how many universes I might want!
I think you'll find there's no "one right answer" to your question.
In the beginning, there were just a few choices, of which the SANdevices E68x was primary, with some others coming right after. We even had several group buys on the E680 and 681 when it made sense. Then more choices came about, and now we have lots of choices - that all do about the same thing.
Whether a single pixel controller that handles 10's of universes is right versus more smaller ones is highly dependent on how your display is laid out, the size of your wallet, and how you like to program things.
Again, early on, I decided that I was going to dedicate a controller to a given fixture or area and so chose to purchase 4-5 E68x controllers and place them right by the fixture. This allows me to move a fixture, like a big light fan or pixel tree or the like, and not worry about other items at the same time. They run off their own controller.
Sean makes a great point - the support and user base of a given controller can be a major factor in choosing a controller.
In the end, keep asking questions, and folks here will be glad to help you out.
