My last few orders of lights & connectors I have bought from Ray Wu. For shipping to Canada, Ray Wu is easy and brokerage etc is low (and predictable)...
Ok, before I did something serious to the board, I thought I would check things out a little closer with a wire. I could not make the wire work (like...
Partial success. I tried plugging it into the PC and scanning for devices. None found. I am powering the FM Transmitter from my USB cable. With th...
Thanks for the help on this Matt. I looked up the audio page on both my Mac and PC with it plugged in .... nothing from my transmitter ᘶ...
uzelessknowledge wrote:Oh ok. What's the power draw on the 12v 30/10? Video link didn't work. Last year I bought my LED strips from Holidaycoro The...
Nice observation. I didn't realize in the close-up picture that I posted an LED strip which I didn't use on my house. I used 12V 30/10 for my house. I...
I used a similar method of slipping the strip in the soffit ledge. With the strip that I used (undersill trim), my light strips point down towards the...
I am also new to the whole data/distance thing and chose to start with a Falcon F16V2 controller. I just ran a cat5 cable today carrying data and gr...
Got my first show up and going! Here is the video of my house! The floods worked great (the support from AJ with his videos and even skyping with m...
Thanks AJ, a Skype session would be great! PM sent
I apologize; being a total newb, I read my voltage readings wrong (the 5V was 5mV). I checked 4 boards and all yield similar results (3 boards that d...
stampedeboss wrote:No issues with trimming but they don't have to go through the holes. Tin the ends and simply tack to the pad. I use 2.54 wafer con...
I have 8 out of 10 floodlights working correctly (and will get back to the final two after I have the others wired up and display ready). I soldere...
Just to update, I have got my first pixiflood board soldered and it is working correctly. I used solder paste and a cheap heat gun and was surprised h...
