ws2811 mounting
 
Notifications
Clear all

ws2811 mounting

36 Posts
16 Users
0 Reactions
47.6 K Views
Posts: 20
(@bjarmstr)
Eminent Member
Joined: 13 years ago
uzelessknowledge wrote:Oh ok. What's the power draw on the 12v 30/10?
Video link didn't work.

Last year I bought my LED strips from Holidaycoro http://www.holidaycoro.com/Smart-Pixel-LED-RGB-Strip-30-LEDs-m-50-Pixels-m-p/700.htm The spec says 3 amps per strip. My longest run is 30' (across the front of the garage) so it would be about 6 amps. I never tested to see if reality matched the specs. I wasn't too worried about the full white scenario so didn't need to do any power injection along that run.

Not sure why you couldn't make the link work. You can try searching bjarmstr, vimeo, monster mash


Reply
Posts: 234
(@uzelessknowledge)
Reputable Member
Joined: 12 years ago
Bjarmstr wrote:Last year I bought my LED strips from Holidaycoro http://www.holidaycoro.com/Smart-Pixel-LED-RGB-Strip-30-LEDs-m-50-Pixels-m-p/700.htm The spec says 3 amps per strip. My longest run is 30' (across the front of the garage) so it would be about 6 amps. I never tested to see if reality matched the specs. I wasn't too worried about the full white scenario so didn't need to do any power injection along that run.

Not sure why you couldn't make the link work. You can try searching bjarmstr, vimeo, monster mash

Thanks.
Think work is blocking it.


Reply
Posts: 928
(@arw01)
Noble Member
Joined: 13 years ago

I did my strips in pex tube 3/4" and had my soffit installer leave the lip up a bit on the fascia wrap. He then bent me some extra white pieces that I cut into 3-4" pieces that also had a lip so I could slid my small pieces into that fascia/soffit edge there and pull it back and it would "lock" into each other like the jchannel photos above.

However, when the "mega tree" hit the house, they all had to come down and my new contractor made the fascia wrap TIGHT, so that does not work as perfectly now that I am getting them back up. The strips are going on 4 years in the pex tubing, so that has worked pretty well.

I have 41' of it and on full white I need power injection in the last 20% or so, I back feed it and that works easy enough.

The J channel in the vynil looks really well done, if I change out of strips someday ( would like more density really, so maybe go to a 60 pixels a meter vs nodes, don't know) at 41' I have 128 "nodes" of 3 pixels each, at 4" spacing that would be about the same and I would really love about 1" spacing. Be a nice way to light up the front yard too if I was out there working after hours.


Reply
Posts: 63
(@musicman1623)
Trusted Member
Joined: 10 years ago
uzelessknowledge wrote:Used a jig to drill the holes.

Sent from my iPhone using Tapatalk

What is the spacing you were using? I love this option

Sent from my iPhone using Tapatalk


Reply
Posts: 234
(@uzelessknowledge)
Reputable Member
Joined: 12 years ago
Musicman1623 wrote:What is the spacing you were using? I love this option

Sent from my iPhone using Tapatalk

Thanks. It's supposed to be 2". It came out at about 2.25". I haven't been able to get a video, but it looks great. Hanging on the house it looks so clean and blends in.


Reply
Page 4 / 8
Share: