Braveit1 wrote:I was emailed the firmware from Jim but after installing it, I cannot find the ip address of the controller. Even plugging it to my ro...
Braveit1 wrote:Any chance you can send it to me? I'm playing with an unupgraded e681 as well. Learning it for next year. Running 8 Ren24's right now...
I believe the quick answer is No on the 100 count. They don't use the same controller, and appear to use the AC line to tell a chip to just do pre-pr...
I went to my local Lowes on the day after Christmas. I saw that most items were still at 50%, but a relative of mine who works at another Lowes had t...
Jim did respond to my PM, and I just got a new copy of 2.047 from him via email in the last day or so. I haven't tried it on a controller yet, mostly...
I found an old email from Jim where he sent me a v2.047 version. Only problem, it's not exactly a good file. It loads fine on the old E681, but it t...
jchuchla - Sent you a PM. Richard - I couldn't fine that file you mentioned on the SANdevices site. There's a E681v2.051-01maybebad.eeprom file. No...
angus40 wrote:It is here Mark . The E681-6v2.049 is there, but that's for the upgraded Wiznet module. I still have an old one on these.
I believe the original question was, "Why aren't there more wifi based controllers?" I didn't mean to imply that wifi was too "hard", just that it ha...
madsci1016 wrote:Thanks! My day job is drones and I've done extensive testing on various brands and models of WiFi gear for reliable comms. I like Ubi...
Most stage fixtures have a DMX splitter/repeater inside the fixture, but not all. In most cases the run is short enough that it doesn't cause too man...
The wiki is your friend. Here's your issue. You said you are using a USB->DMX adapter. This will put out 1 DMX universe or 512 channels. That's...
I have an interest in these. However, I'm not local. Would you consider meeting somewhere in between or I might be talked into coming most of the ...
You have to get your mind wrapped around how things work. The Vixen screen tells Vixen how to map the Vixen channels to the E1.31 universes. The E68...
