Pixel Controller de...
 
Notifications
Clear all

Pixel Controller decision

26 Posts
15 Users
0 Reactions
10.5 K Views
Posts: 114
Topic starter
(@wilkija)
Estimable Member
Joined: 12 years ago
[#36425]

This year will be my first year, and I want to include some pixels in my display. I'm sure that I would eventually phase out the LED lights and do mostly pixels. It seems like there are tons of pixel controllers (and more every day), so how do you guys go about making a decision on what to go with? I'm looking at the SanDevice or a PixLite, mainly because those seem to be very popular and I'm sure I'll have tons of questions. I have a feeling that it might not really matter, and it may just be a Ford vs. Chevrolet decision. Either way, I'd like to hear some thoughts/suggestions for someone starting out.


25 Replies
smeighan
Posts: 2595
(@smeighan)
Famed Member
Joined: 15 years ago

I made a table showing the various controllers
Www.nutcracker123.com/nutcracker/rgb_controllers

I think other factors besides what is in that table
Active user base
Under active development
Training
Ease of use
Do u have multiple string types u want to drive from controller

Sent from my iPhone using Tapatalk


Reply
Posts: 482
(@jcmarksafb)
Honorable Member
Joined: 15 years ago

I use the SanDevices 682, one reason is it can be ordered as a kit which saves me money and I enjoy building kits. Like Sean said it depends on the pixels you want to use. I use ws2811 strips/strings in my display. You really can't go wrong with your first controller, they all work well and you will learn much more just jumping in and playing with the hardware/software than just reading about it. There is no ultimate software/hardware, each does different things better. Jump in and have some fun!
John


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

Don't forget the SansDevices E6804. It's does 5 or 12 volts dc outputs. $69 for kit and $9 shipping.


Reply
dmcole
Posts: 2196
(@dmcole)
Noble Member
Joined: 19 years ago

If you're going to do fewer than 170 pixels, a Komby system is an inexpensive way to get started. You can drive it with either E1.31 signals or DMX or Renard. Assuming you have only one area where you're using pixels and with the products on pre-sale right now, you can build a setup for less than $40.

\dmc


Reply
Page 1 / 6
Share: