Skunberg wrote:If you're in any kind of a hurry don't wait for the little one. It will be a couple of months, maybe this fall before it's available. And will be harder to mount and wire. So unless ypu need smaller or stand alone the regular 6804 may be a better choice.
Interesting that in your opinion it will be harder to mount and wire. Mounting might require a small plate to give it a bigger foot print. I am to understand you will need two 4-40 nuts and screws. So this is the reason I am thinking you will need to mount it to a small plate and then the plate to a small water tight box. Depending on distance and load you might be able to power everything from the Cat 5 cable. But dont quote me on that. So, all you are going to need to wire to the controller is a Cat 5 cable (the biggest and stiffest wire). A couple of 26ga wires for power. And another small wire for data. Now some form of mini terminal strip would help with the individual wire terminations. Now fusing might be something of a trick. Bet there are some good solutions at Digi-key or a few of the other parts houses.
