rdj6107 wrote:1st pic is what the outline used to look like with cool white C9 bulbs. the 2nd pic is what i have now left side of 1st floor, 3rd pic is right side of 1st floor. under the eaves, out of direct sunlight and out of the rain. what worked out even better for me was the house has vinyl siding so the side of the J channel wedged perfectly between the house sofit and existing siding.note: the j channel was 12.5 feet long as was available at my local lowes . i was able to get 24 nodes per piece. made it easier to keep track, just counted the number of full j-channel strips times 24 + the extra i had to add at the end for the perfect fit.
Yeah man, that setup is sharp, I dig it. Any chance you can capture a night shot? I am curious as to how it looks with the pixels visible as opposed to hidden with only the diffuse light visible.
i can get you a pic but probably wont be till the weekend. my install plan went wayyyyyyy off track. was suppose to put the pinky toe in with 200 pixels, ended up going head 1st will 1000 pixels installed. i only had an alphapix 4, while plenty robust enough to handle a 1000 pixels. my layout of a 2 story house on a corner lot and having to run garage outline to roofoutline to window outline back to roof outline back to window outline had me all jacked up. got all of the show down but now i have to rewire/reconnect the roof outlines for year round usage, i.e. valentines day, 4th of july etc.
I don't get how u installed this. The lights were facing down and the strip with the holes was above. So how did you put it up ? I could see if you slipped it in, but it appears you slipped it up
I'm confused and I bet I confused you now 🙂
Like the way that looks. Did you nail or screw 1x1? over nail pad of j-channel? How do you replace bad LED?
oops, repeat of my question - removed
