Argento wrote:Damn, that is a super clean setup in the vinyl rail. Where did you find the pixel strings with 6" spacing?
i believe Holiday Coro carries 6" spacing. if you aren't planning on order alot of pixels, like 2000+, it probably won't beneficial to order direct? then again, the holiday starts tomorrow for the LED/PIXEL factories abroad. they will be shut down for 3-4 weeks. but if you got your order placed by the end of February, you would probably receive your order by the end of march which is still a couple of months faster than going through a US site. when you order direct, u can custom order any length you want. 5", 6" etc. only thing would recommend with longer runs despite the length between pixels is make sure you are requesting 18awg vs. 20awg. and while 5v pixels will save you a few cents, for eaves and house outlines 12v will get you a greater distance which means less pwr injection points.
rdj6107 wrote:this is where i owe you a pic and will get the finished install tomorrow.
I am super curious to see how this setup looks! Hint, hint, lol. :biggrin:
I am curious as well
1st pic is what the outline used to look like with cool white C9 bulbs. the 2nd pic is what i have now left side of 1st floor, 3rd pic is right side of 1st floor. under the eaves, out of direct sunlight and out of the rain. what worked out even better for me was the house has vinyl siding so the side of the J channel wedged perfectly between the house sofit and existing siding.
note: the j channel was 12.5 feet long as was available at my local lowes . i was able to get 24 nodes per piece. made it easier to keep track, just counted the number of full j-channel strips times 24 + the extra i had to add at the end for the perfect fit.
sorry for the neck cramp. guess i should have rotated the pics before posting.



