Looking for thought...
 
Notifications
Clear all

Looking for thoughts on shrubs

20 Posts
8 Users
0 Reactions
7,829 Views
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago
[#44680]

Hey All,

I'm tossing the idea around of going with pixels on my house shrubs......none above 4 feet tall or wide.....

I'm thinking of using a mesh to evenly space the pixels and orient them toward the front.

Just curious is anyone is using pixels like that and if there's any feedback on how it looks versus dumb LED strings..... Obviously the color possibilities are there.... Just not sure about how the uniformity of pixels in a fixed mesh would look.....

Anyone who has played with variations on that theme please offer your insights....


19 Replies
Posts: 1159
(@deonb)
Noble Member
Joined: 13 years ago

Keep in mind with xLights you don't need uniform pixels anymore if you don't want to.

You can put them on organically wherever it fits on the plant, and then do a "Generate Custom Models" to play a sequence to it, then capture a video recording of it and feed it back to xLight to build a grid prop out of the pixel positions.


Reply
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago
deonb wrote:Keep in mind with xLights you don't need uniform pixels anymore if you don't want to.

You can put them on organically wherever it fits on the plant, and then do a "Generate Custom Models" to play a sequence to it, then capture a video recording of it and feed it back to xLight to build a grid prop out of the pixel positions.

Wow...I had no idea...I also have no idea how to do what you describe! :biggrin2:

Actually...one of the reasons I was thinking of using the mesh/grid idea was to simplify setup time.....the mesh/grid idea was something that I could drape over the shrub....plug and play....then at the end of the season, instead of spending a couple of hours winding up strings...instead just roll up the grid and be done in about 15 minutes.... 💡

But your description about generating custom models and recording it has me curious..... Has anyone done a tutorial or demo on how to do that?


Reply
Posts: 401
(@kensington)
Reputable Member
Joined: 11 years ago

Ray Wu will make you a net from bullet nodes if you want to save your thumbs. I think he may even have them as a standard item on his store now.

With regard to the custom model, did you seriously just ask if someone has done a tutorial ? 🙂 There is a video. I believe you can find it on the XLights site, and the procedure may even be in the manual (don't have it in front of me). Essentially, you point your webcam at the prop, run the tool, and XLights captures the light positions and maps them to a custom model.


Reply
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago
deonb wrote:Keep in mind with xLights you don't need uniform pixels anymore if you don't want to.

You can put them on organically wherever it fits on the plant, and then do a "Generate Custom Models" to play a sequence to it, then capture a video recording of it and feed it back to xLight to build a grid prop out of the pixel positions.

Something to consider, if you do random placement and the video mapping then you will have to do it every year as you probably aren't going to be able to place the pixels in the same spot as last year. It might not make a difference, but I would keep in the back of your mind.

Sent from my Pixel using Tapatalk


Reply
Page 1 / 4
Share: