I modified the code to be able to do more than 1 universe(Actually it was ripped from some other code I found in another thread). Does anyone happen to know how many universes or how many pixels can be driven from 1 Gpio?
I would test this but I have just gotten into this hobby and don't have enough pixels to test with.
The GEColorEffects arduino library works with the esp8266 modules. If anyone wants to try the code, let me know and I'll post it here. Thanks to ceburge, your code was well written and I had no problems modifying it for the GECE library. One thing that really surprised me; there were zero problems enumerating the GECE pixels, I thought for sure this was going to be an issue. I did several reboots of the esp8266 (with powering down the pixels also) and they enumerated correctly every time.
I really like the Arduino IDE over NodeMCU, it gives way more flexibility when it comes to modifying code. Any future development I do with the esp8266 modules will definitely be in the Arduino IDE.
Glad you like the code but I can't take the credit for it.
The code that is there is a collaboration of code that others have written and I just put it together to make it work.
Good to see you got your GECE lights working with the ESP. I think this little module is going to great in this community.
EE351 wrote:The GEColorEffects arduino library works with the esp8266 modules. If anyone wants to try the code, let me know and I'll post it here. Thanks to ceburge, your code was well written and I had no problems modifying it for the GECE library. One thing that really surprised me; there were zero problems enumerating the GECE pixels, I thought for sure this was going to be an issue. I did several reboots of the esp8266 (with powering down the pixels also) and they enumerated correctly every time.I really like the Arduino IDE over NodeMCU, it gives way more flexibility when it comes to modifying code. Any future development I do with the esp8266 modules will definitely be in the Arduino IDE.
I've designed a PCB that should be a drop in replacement for the GECE controller and fit inside the stock enclosure. I'll let you know if it works and send a few to people to test. Not sure if there will be enough interest to make it any more than a fun project though.
Why make it? I was thinking of just having a few strands of GECE around my display and figured it was easier to just swap the controller board, but still use the stock controller box and power supply. Might be good for just throwing a strand on the Christmas tree as well.
madsci1016 wrote:I've designed a PCB that should be a drop in replacement for the GECE controller and fit inside the stock enclosure. I'll let you know if it works and send a few to people to test. Not sure if there will be enough interest to make it any more than a fun project though.Why make it? I was thinking of just having a few strands of GECE around my display and figured it was easier to just swap the controller board, but still use the stock controller box and power supply. Might be good for just throwing a strand on the Christmas tree as well.
I don't think the gece pixels are as popular now compared to when they were first released. I purchased all of mine at a discount and will most likely continue to use them for the foreseeable future.
Okay .. I'm still reading all of this thread .. but ..
Man .. I get sidetracked by one little squirrel and a whole new breed of controllers is born !!!
MadSci and EE seem to have the GECE portion working ..
EE... will this have the same issues we found with the Parallax project we worked on (Works with XLights/Vixen but cant keep up with LOR...)
I'll finish reading all the posts to catch up ...
Not sure I can contribute to anything .. but ask EE... I can sure screw it up ...
Bob
Bob Moody wrote:Okay .. I'm still reading all of this thread .. but ..
Man .. I get sidetracked by one little squirrel and a whole new breed of controllers is born !!!MadSci and EE seem to have the GECE portion working ..
EE... will this have the same issues we found with the Parallax project we worked on (Works with XLights/Vixen but cant keep up with LOR...)I'll finish reading all the posts to catch up ...
Not sure I can contribute to anything .. but ask EE... I can sure screw it up ...Bob
I think the issue before was the length of the gece string you were using. It's not possible to have a 40hz refresh rate with the gece pixels if the pixel count is greater than 30 per output. With that said, the only way to know for certain is to try it out in lor and see if it works.
Madsci - I'd be interested in the drop-in PCB for GECE's if you're making/selling them.
EE351 wrote:The GEColorEffects arduino library works with the esp8266 modules. If anyone wants to try the code, let me know and I'll post it here. Thanks to ceburge, your code was well written and I had no problems modifying it for the GECE library. One thing that really surprised me; there were zero problems enumerating the GECE pixels, I thought for sure this was going to be an issue. I did several reboots of the esp8266 (with powering down the pixels also) and they enumerated correctly every time.I really like the Arduino IDE over NodeMCU, it gives way more flexibility when it comes to modifying code. Any future development I do with the esp8266 modules will definitely be in the Arduino IDE.
I would like to try it.
scootchu wrote:I would like to try it.
Ok, here it is. You will also need the GEColorEffects library from the link below:
http://www.digitalmisery.com/wp-content/uploads/2011/11/GEColorEffects-Arduino-1.0.zip
You need to change the SSID, password, ip (address, subnet, and gateway), and number of pixels in the sketch to fit your setup.
Here's a link with directions to install the esp8266 Arduino ide plugin:
http://www.esp8266.com/viewtopic.php?f=26&t=3094
Here's a link with a tutorial for using the esp8266 arduino plug in:
http://makezine.com/2015/04/01/installing-building-arduino-sketch-5-microcontroller/

