girldadxmas wrote: Dude I've worked with electricity for the last 20 years. There is no need to talk to me like I'm a child Welcome to the forum! I...
I think we can expect things like WS2811 chips and ESP32 chips to be hit with tariffs. I wonder if the ESP chips will be blocked completely as thos...
MartinMueller2003 wrote: To do 8 ports of pixel data + sd you need 11 Output capable pins and one input pin. Pins above GPIO32 are input only. It look...
MartinMueller2003 wrote: Max implementation for ESPS V4 is 10 ports (8 one wire pixel ports [aka WS2811], one two wire pixel port[aka WS2801] and one ...
MartinMueller2003 wrote: That is VERY software implementation dependent. The ESPS V4 supports 3000 pixels. Thanks, for WS2811 pixels would it be a m...
I would suggest looking for used projectors on ebay. I was able to get a few Epson brightlink 595wi short throw projectors for super cheap and they h...
Yikes, I bet HC reported all the Christmas lighting vendors, controller, and prop makers that are well known on this forum. Pretty low. What I don't...
You could try a virtual matrix, the resolution will be lower but should stay in sync. Also, does the video play correctly if you start it directly fr...
MartinMueller2003 wrote:FYI: V4 supports the WT32 module. Image is part of the release set Thanks Martin, does the flash tool work for the installat...
jchuchla wrote:Not to hijack the thread. But which firmware are you using on these? ESPixelStick or WLED? How many outputs per ESP are you driving?...
P. Short wrote:And depending on availability... Technically they aren't available yet. I would expect we'll start seeing some breakout modules next...
This is interesting, it looks like there is a 5ghz ESP module: Depending on the price, this might work well in areas that have a lot of 2.4ghz cong...
I'm currently running 40 ESP8266 modules with 24 universes over multicast at 50ms refresh rate with zero lag or issues. Here's a few more tips: if y...
Another option, if your willing to wire the pins by hand, is the wt32-eth01 module using wled. This can drive up to 8 outputs with ethernet or wirele...
