I know this is an older thread, but just wanted to share that I had some boards made to include the ESP01 WiFi module to the Foxcub and using Sporadic...
sporadic wrote:You need to update your esp8266 core. Use this json for the board manager - Thanks. I did not realize they had changed the URL for t...
sporadic wrote:Thanks! By the way, I removed the web stuff from the E1.31 library. It was just starting to get out of scope w/ the library for what ...
I myself designed my boards to use a ftdi prop plug since I already had one. I have one of the cheap usb to ttl converters from the vendor I bought my...
I'm not a coder but I can somewhat follow along with the Arduino environment. Seems like everytime I get something going I find something else I would...
madsci1016 wrote:My design makes use of 2 diodes and a resistor to bring up the voltage by 1 diode drop, which (should) be just enough to be in toler...
Here is a sketch that does this. It's not in library form though but its been said to work. Here is the link to the library.
ceburge wrote:I havent had time to read into it alot but from what I did read it runs at startup in AP mode and thats where things are set then once i...
I havent had time to read into it alot but from what I did read it runs at startup in AP mode and thats where things are set then once its submitted t...
There is someone that has written a library over on the ESP Community forum that does something similar to that. It supposed to write to eeprom. Howev...
Glad you like the code but I can't take the credit for it. The code that is there is a collaboration of code that others have written and I just put i...
Under void setup just add the WiFi.config (ip, gateway, subnet) after WiFi.begin. No extra file to add to mix its already in the library. Also you wil...
scootchu wrote:I got the sketch to upload. serial monitor said I was connected, but no IP address was listed. How do I assign a static IP in the sketc...
I modified the code to be able to do more than 1 universe(Actually it was ripped from some other code I found in another thread). Does anyone happen t...
Glad to here it work for you.
