schuricg wrote:Pin out and position was correct. My problem ended up just being a dead string. Looks like the data line is not passing through. Power and ground were good but not driving pixels. Replacement on its way. Great customer support from Ray!Sent from my iPhone using Tapatalk
Hi, I'm guessing the other strings work - it might be worth trying to save the string.
After checking the plug and first pixel, I'd use the 50% fault finding rule:
Cut the strip in the middle - test both halves - which ever one doesn't work:
Cut the strip in the middle - test both halves - which ever one doesn't work:
You get the idea - the fastest way to fault find.
With 64 pixels - test - cut now 32 - test - cut now 16 - test - cut now 8 - test - cut now 4 - test - cut now 2 - cut now 1 - job done - now out them back together.
Cool - 64 pixels = 5 tests and joints to resolder.
Barnabybear wrote:Hi, I'm guessing the other strings work - it might be worth trying to save the string.
After checking the plug and first pixel, I'd use the 50% fault finding rule:
Cut the strip in the middle - test both halves - which ever one doesn't work:
Cut the strip in the middle - test both halves - which ever one doesn't work:
You get the idea - the fastest way to fault find.
With 64 pixels - test - cut now 32 - test - cut now 16 - test - cut now 8 - test - cut now 4 - test - cut now 2 - cut now 1 - job done - now out them back together.
Cool - 64 pixels = 5 tests and joints to resolder.
With pixels this is not necessary, if the entire string is not working it is the connector or first pixel. First thing I would do is make sure the pixels are facing the right direction, they may have soldered the input plug to the output for the pixel string.
If that is OK then next is if the plug is passing power, ground and data?
If yes them the only thing left would be the first pixel is dead.
