Notifications
Clear all

PX1 issues

7 Posts
3 Users
0 Reactions
1,940 Views
Posts: 18
Topic starter
(@igfrey)
Eminent Member
Joined: 14 years ago
[#40861]

Light work great when wired direct
added 20 feet of 18awg getting 5.05v at far end
light act bizzare not like when there directly connect
solder joints are solid
if I take another good string and plug right to px1 no issues.
I'm thinking the data line is to weak for that distance??


6 Replies
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

you may need too add a null pixel at 10' too relay the data down the line


Reply
Posts: 18
Topic starter
(@igfrey)
Eminent Member
Joined: 14 years ago

null pixel never used one before
ws2811
sounds like a basically splice one in
to boast data line


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

yeah that is how ya do it have too account for it in your setup ie.. if you have element with 50 pixels you need too setup controller as 51 pixels and patch the element too the last 50 pixels


Reply
Posts: 326
(@jsheehan3)
Honorable Member
Joined: 17 years ago

Hey Taz. Can you use a bad pixel (doesn't light to all 3 colors but still passes signal) as a null? Might be worth saving some of the bad ones I cut out.

Sent from my iPhone using Tapatalk


Reply
Posts: 18
Topic starter
(@igfrey)
Eminent Member
Joined: 14 years ago

I got re-ran wires found 12 I wacked everything golden
thanks


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

as for using a bad pixel if it passes the signal down the line it should be ok I never tried it myself my yard is small so no null pixels as of yet


Reply
Share: