flood lights fail
 
Notifications
Clear all

flood lights fail

17 Posts
7 Users
0 Reactions
4,769 Views
jhoybs
Posts: 59
(@jhoybs)
Trusted Member
Joined: 11 years ago
waites wrote:HI jhoybs. Can you post a pic of your 20w flood light and how and what kind of power supply you used. Thanks

Sent from my SM-G900V using Tapatalk

Here you go. I intend to use one Meanwell LRS-200-24 power supply with 2 channels of a differential receiver (from my F16v3). I'm also inserting uAmps with a Zener regulator to power it from the 24v down to 12v in each flood's data output.

PC1
PC2
LED Chip
In Housing
Schematic

Reply
Posts: 740
(@ezellner)
Prominent Member
Joined: 11 years ago
jhoybs wrote:Here you go. I intend to use one Meanwell LRS-200-24 power supply with 2 channels of a differential receiver (from my F16v3). I'm also inserting uAmps with a Zener regulator to power it from the 24v down to 12v in each flood's data output.

In the second photo, there are some rather large solder globs (like on the transistor) that may actually be cold solder joints. The solder is fused to the transistor lead but doesn't appear to be fused to the board. I would remove the solder excess and redo any connections that look similar.


Reply
Page 4 / 4
Share: