flood lights fail
 
Notifications
Clear all

flood lights fail

17 Posts
7 Users
0 Reactions
4,768 Views
Posts: 87
Topic starter
(@waites)
Estimable Member
Joined: 14 years ago

OK tomorrow I will remove and clean some solder lead, I hope this work. Thanks all of you for your help.

Sent from my SM-G900V using Tapatalk


Reply
Posts: 87
Topic starter
(@waites)
Estimable Member
Joined: 14 years ago

10v to 12v the last time I check it

Sent from my SM-G900V using Tapatalk


Reply
Posts: 1041
(@n1ist)
Noble Member
Joined: 19 years ago

I don't believe that board allows using an LED with a common cathode. Try removing the tab that connects the three pins together on that side of the LED.
/mike


Reply
Posts: 87
Topic starter
(@waites)
Estimable Member
Joined: 14 years ago

Hi all of you and thanks for all of your help. I finally could get 6 out of 8 flood lights working. I re-soldered every point and removed all the extra lead, I also cleaned them up with this spray cleaner for electronic items. Unfortunately 2 of them still no working but I guess it's ok. Thanks so much.

Sent from my SM-G900V using Tapatalk


Reply
Posts: 87
Topic starter
(@waites)
Estimable Member
Joined: 14 years ago
jhoybs wrote:You need to be more detailed as well. RobG kits? 10,20 or 50 Watt? DMX, WS2811? You also might want to tell us if you are running them with short wires or longer wires (ie: display length). I just put 6 RobG, 20W WS2811 kits together and they all worked first time (I was kinda surprised).

HI jhoybs. Can you post a pic of your 20w flood light and how and what kind of power supply you used. Thanks

Sent from my SM-G900V using Tapatalk


Reply
Page 3 / 4
Share: