Activity
 
Notifications
Clear all
jhoybs
jhoybs
@jhoybs
Trusted Member
Joined: Aug 21, 2015
Topics: 4 / Replies: 55
Topic
Replies: 6
Views: 7762
Reply
RE: Outdoor Power supplies

I have Meanwell 350W and 100W supplies in CG-1500, CG-500 & CG 1000XL enclosures. I fuse everything so I use fused distribution boards (Falcon F8-Dis...

9 years ago
Reply
RE: AC lights tripping GFCI when it rains.

I've been running a display for 30+ years and I've only tripped my GFCI at any house once. I never taped any connections on my megatrees or tried to ...

9 years ago
Reply
RE: a problem with a RobG WS2811 10watt flood

TheLost wrote:I'm not sure how heat can damage these boards. It takes more heat than a hobby soldering iron to attach the SMD components. I'm not ...

9 years ago
Reply
RE: 20W Flood RGB LED driver board (WS2811)

jeholla - It does look like you could have some cold solder joints, but I don't see any obvious shorts. Question for both of you - did you use static...

9 years ago
Reply
RE: Pigtails, Extensions

jbourne - Not sure if anyone answered your first question. One of the most frustrating things about pigtails is that every vendor's pigtails are not ...

9 years ago
Reply
RE: 20W Flood RGB LED driver board (WS2811)

jeholla wrote:I am using the pi with pi cap (falcon) to test. I feel I had a good ground. I also found that I had one bad solder connection on the ic...

9 years ago
Reply
RE: I'm Back!

Are you looking to do pixels or AC lights? If pixels and you want to start with 16+ channels, the Falcon F16v3 is a great choice. This controller ca...

9 years ago
Reply
RE: a problem with a RobG WS2811 10watt flood

There are 2 areas that could trip you up. Make sure you are placing the small, yellow caps in the correct place and make sure you cut apart the leads...

9 years ago
Reply
RE: a problem with a RobG WS2811 10watt flood

I bought 6 - 20W WS2811 RobG floods this year - love 'em.

9 years ago
Reply
RE: Falcon F4V3 lights on after sequence ends.

Check that all your elements are off in your sequencer when the sequence ends. This got me at Halloween this year - elements stayed on.

9 years ago
Reply
RE: Heat problem this time of the year?!?

I started my display 3 years ago with the idea of controlling it with my PC. Two weeks before running my first show, I switched to an FPP on a Raspbe...

9 years ago
Forum
Reply
RE: a problem with a RobG WS2811 10watt flood

What does the light do using the falcon test mode? Do you have your flood defined in the E1.31 inputs and String Ports?

9 years ago
Reply
RE: tired of same ole lights

I switched to xLights this year, but I used Vixen before that. Vixen shouldn't delete anything - are you sure you downloaded from the correct link?

9 years ago
Reply
RE: Hi!

You'll have to provide more details. Are you looking for a prop, a sequence or something else? What is your existing display?

9 years ago
Page 1 / 4
Share: