Notifications
Clear all

I'm Back!

6 Posts
4 Users
0 Reactions
2,020 Views
Posts: 19
Topic starter
(@jseymour84)
Eminent Member
Joined: 17 years ago
[#47821]

Hey everyone,

Quite a few years ago I started exploring doing one of these light shows, but it never went anywhere. Then I went back to finish my BS and MS degrees and now that those are done, I find myself with a bit of time to put into this hobby.

The first step I want to take is to build a single controller and sequence three songs. I am not sure which controller to build. I would like to build a controller that I can grow with, so I was thinking about either a 16 channel or 64 channel controller. The 16 channel would probably be the better bet, but I am open to other ideas. I was thinking Raspberry PI to run the shows so I can wire everything back to my garage. My yard lays out in such a way that the house is on the left of the driveway and detached garage, and a side yard with a row of 15' lilac bushes across the back is on the right side of the garage. For my first show, I am loosely thinking a tall tree with a bunch of mini trees to represent a choir with conductor, and play around with a call and response type of sequence where the conductor lights on the calls and the choir on the responses.

I was thinking Cat5 for my data cabling as I used to install Cat5 back when I was a younger man.

So the first couple of questions I have...

Which controller?

Is a Raspberry PI a decent enough platform for running shows from?

Is Vixen still the software for sequencing?

I will try to post some photos of the space I have to work with to see if any of you have some other ideas for me to think about.


5 Replies
Posts: 144
(@drewdennis)
Estimable Member
Joined: 9 years ago

I'm still a newb but here's what I have learned so far.
Raspberry Pi3 with FPP is perfect for handing the duty of running the show.
Vixen is great - as is Xlights. (in my playing around so far I think I like Xlights better.)
You can never have too many channels. I have bought a couple of ESPixelSticks to learn how to do all this...then am looking at using A falcon F4V3 as my first "big" controller. https://www.pixelcontroller.com/store/index.php?id_product=51&controller=product

Good luck - I can see how this can get addicting!


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

The PI is doing a great job running a show with greater than 60000 channels. It should have no issues with your 16 channels. As for sequencing software, xLights and Vixen are great choices and use very different models. You should experiment with both to see which you like better.


Reply
jhoybs
Posts: 59
(@jhoybs)
Trusted Member
Joined: 11 years ago

Are you looking to do pixels or AC lights? If pixels and you want to start with 16+ channels, the Falcon F16v3 is a great choice. This controller can do 16 channels and it can also be expanded with add-on boards. If you want to start out smaller, you can also do a PiCap - it is an add-on board to the RPi/FPP and has 2 outputs. I am new to pixels this year and have one of each of these controllers and FPPs.


Reply
Posts: 19
Topic starter
(@jseymour84)
Eminent Member
Joined: 17 years ago
jhoybs wrote:Are you looking to do pixels or AC lights? If pixels and you want to start with 16+ channels, the Falcon F16v3 is a great choice. This controller can do 16 channels and it can also be expanded with add-on boards. If you want to start out smaller, you can also do a PiCap - it is an add-on board to the RPi/FPP and has 2 outputs. I am new to pixels this year and have one of each of these controllers and FPPs.

I am not sure what pixels are. I was looking to just start with a few strings of LED lights to play around with over the summer. If memory serves, I bought two PCBs to build a couple Renard SS8 controllers back in 2010 but never got around to building them. If I still have the boards then I will just build those to start with.

Thanks for all the responses 🙂 It's definitely helping me think through how I want to proceed.

Merry Christmas everyone


Reply
Page 1 / 2
Share: